If you want to take a taxi from Dana Point to John Wayne Airport, you’ll find it helpful to check out the taxi fare map. This will give you an idea of the cost and route. A taxi fare can vary significantly, so it’s important to compare rates to ensure you’ll get a good deal. The estimated cost above is based on the number of passengers traveling and the distance.
Orange County John Wayne Airport has taxi meter machines located in the Ground Transportation Center, which is located on Arrival Level between Terminals A and B. The meter booths are located on the right side of the Arrival level, near Column 14. Depending on where you’re going, the cost can be anywhere from $3.50 to $19. There’s also a $2.25 airport fee. Remember that tipping the driver is typically 15% of the fare. It’s also a good idea to be flexible about the time of day you want to travel – most cabs run on a first-come-first-serve basis.
A taxi from Dana Point to John Wayne Airport is only 25 minutes away. It’s easy to get to Dana Point from the airport by car. You can take the San Diego (5) Freeway or the Pacific Coast Highway, which will take you north or south of the airport. You’ll be surprised at how much easier it is than you think. Just be sure to have enough cash on hand because most taxis will run out quickly.
A taxi from Dana Point to John Wayne Airport is a convenient way to get to and from the beach. The city is also accessible by car and is a popular destination for vacationers. You can reach it in 25 minutes, so it’s worth taking a cab. You can use the San Diego (5) Freeway to get there. There’s also a trolley service that takes you to the beach.
Taking a taxi from Dana Point to John Wayne Airport is convenient, safe, and affordable. The airport is 25 minutes away from Dana Point. By car, you can access the city from north, south, or east. The San Diego (5) Freeway is the major highway and is also connected to Pacific Coast Highway. However, if you’re planning to drive to the city, the meter taxi can be the better option.
A meter taxi at Orange County John Wayne Airport can be a good option if you don’t want to pay a lot. The meter taxis can be found at the Ground Transportation Center in the Arrival Level, near Column 14 and the entrance to Terminals A and B. The fare varies, but typically it’s about $3.50 plus a $2.25 toll fee. Most cabs at Orange County John Wayne Airport operate on a first-come-first-serve basis.
To get to Dana Point from John Wayne Airport, you should take a taxi or take a Metrolink train to San Clemente. By car, you’ll need to find a parking space close to the airport. You can also catch a bus from the city to Dana Point. You’ll need to pay for the meter taxi fare if you don’t have a car.
There are many taxi services available in Orange County that serve the Dana Point area. You can find a meter taxi in the Ground Transportation Center. The meter cabs are located between Terminals A and B and near Column 14. The fares are dependent on your destination and the distance you’re travelling. A meter taxi from Dana Point to John Wayne Airport will cost approximately $25 to transport you to and from your hotel.
There are also meter taxis at Orange County John Wayne Airport. The taxis will be waiting for you in the Arrival level of the airport. They are located between Terminals A and B and in Terminal C near Column 14. The fares will depend on the distance you’re traveling. A meter taxi fare will cost you between $3.50 and $7.00. The airport fee is $2.25. The fare will include tipping for the driver.